Pump Controllers – PC15

Automatic Pump controllers are built for a quiet running operation, Non return valve built-in, pressure gauge, pressure switch and electronic control with dry running function integrated with manual reset button.

Adjustable starting pressure 1.5 - 2.5 bar Plastic union connection included.

It is assembled on a pump for automatic water supply.

Download E-catalog

Anti-Jamming Function
If, for any reason, the pump remains idle for 24 consecutive hours, the device will start the pump for about 7 seconds.

Adjustable Pressure
Selection of the device with the correct restart value.
Standard restart value is 1.5 bar. On request, restart values different from the standard are available as indicated in the table.

When the taps are opened it starts the electric pump automatically after a decrease in pressure. When the taps are closed the fluid flow interrupts at the maximum pressure level of the electric pump and stops the electric pump. If the pump runs without water, the controller off the pump and prevents water hammer.

Technical Specifications:

Rated Voltage: 220-240V
Frequency: 50 / 60 Hz
Max current / Max power: 10A / 1.1 KW
Starting pressure setting: 1.5 – 2.5 bar
Max working pressure: 10Bar
Protecting rating: IP65
Max Working Temperature: 60° C

Specifications:

No Noise, Complete silent
Built in reset button
Automatic start and stop of pump
Protection against dry running
Over heat protection
Examine the water automatically
Forced start

Automatic pump controller is successfully tested up to 50,000 cycles which is more than 3 years of life in normal working conditions